ELKPURE Deoxidizer film 14×28
Details
Elkpure degassing membrane deoxidization membrane module, which is made of permanent hydrophobic PP material, is widely used in ultrapure water deoxidization because of its high flux, high hydrophobicity and high removal rate, power Plant remove carbon dioxide, sewage remove ammonia nitrogen, CO2 capture, pure water before Edi remove CO2, special gas quantitative addition and other fields. Can replace the imported brand LiQUI-CEL G542, G543, G496,0.5 × 1,0.75 × 1,1 × 2,1 × 3,1 × 5.5,1 × 6,1.7 × 5.5,1.7 × 8.75,2 × 6,2.5 × 8,4 × 13,4 × 28,6 × 28,8 × 20,8 × 40,8 × 80,10 × 28,14 × 28, 14 × 40,3 years warranty, cost-effective. The degassing membrane is a membrane separation product which uses the diffusion principle to remove the gas in the liquid, such as carbon dioxide, oxygen and ammonia nitrogen. The working principle of degassing membrane is to utilize the hydrophobicity and gas permeability of hollow fiber membrane, that is, under certain conditions, the gas can pass through the membrane surface but the liquid can not. Because the specific surface area of the hollow fiber membrane is very large, the membrane and the liquid can fully contact, thus can achieve good degassing effect. Elkpure membrane contactor is a hollow membrane module for controlling liquid degassing and gas supply. A hollow fiber layer with a dense surface can only pass through gas, not liquid, this integrated structure can control the gas at a very low level, in the semiconductor industry DO can be controlled at 5 ppb. Applications: thermal deoxidation, chemical industry, iron and steel, integrated circuit, photoelectric, semiconductor package, power plant, food, beer and beverage, medicine, wastewater ammonia nitrogen removal and other fields.